Signatur | Verfasser | Thema |
Se 001 | Meisner, Robert | Internet in Automation - Vergleichende Untersuchung verschiedener Internet - Protokolle |
Se 002 | Laub, Harald | Internet in Automation - Sicherheit im Internet |
Se 003 | Richter, Sebastian | Internet in Automation - Die Funktionsweise einer Firewall |
Se 004 | Zorn,Felix | Internet in Automation - Grundlagen von XML |
Se 005 | Schütz, Achim | Internet in Automation - Internetbasierte Ferninstandhaltung& Fernleiten |
Se 006 | Maas, Heiko | Internet in Automation - Internetbasiertes Engineering |
Se 007 | Baumann, Mark | Internet in Automation - Embedded Linux |
Se 008 | Breitel, Torsten | Internet in Automation - Gebäudeautomation mit Internetanbindung |
Se 009 | Kroneis, Jens | Internet in Automation - Was ist Java? |
Se 010 | Hauser, Andreas | Zwei Ansätze zur Regelung über Netzwerke mit variabler Verzögerung |
Se 011 | Hartmüller, Markus | Regelung über Netzwerke |
Se 012 | Duschau-Wicke, Alexander | Internet in Automation - Gemeinsamer Entwurf von Regelungen und Kommunikationskomponenten für verteilte Systeme mit Wireless UDP |
Se 013 | Wagner, Florian | Internet in Automation - Methoden zur Verringerung des Datenverkehrs bei NCS |
Se 014 | Görges, Daniel | Internet in Automation - Stabilität von Regelungen über Netzwerke |
Se 015 | Pieschel, Martin | Internet in Automation - Zwei Ansätze für Regelung über Netzwerke |
Se 016 | Breiten, Christian | Internet in Automation - Allgemeine Grundlagen zu Ad-Hoc Netzen |
Se 017 | Münch, Philipp | Internet in Automation - Technik und Anwendungen von Ad-Hoc Netzen |
Se 018 | Zahn, Sebastian | Trade-offs zwischen Kommuniktionsparamtern bei drahtlosen NCS |
Se 019 | Nagel, Tim | Regleranpassung mit QoS |
Se 020 | Zirkel, Daniel | Optimal Stochastic Control |
Se 021 | Schuhmacher, Artur | Ereignis basierte Methode für Regelungen in NCS |
Se 022 | Kasel, Andreas | Fuzzy-Modulation eines PI-Reglers im NCS |
Se 023 | Yin, Guo Qing | Queuing Methodolgy for Controllers in NCS |
Se 024 | Völpel, Benedikt | Feedback Stabilization over Signal-to-Noise Ration Constrained Channels |
Se 025 | Hirth, Dennis | Zwei Lösungsansätze für NCS auf Basis von Gain Scheduling |
Se 026 | Prothmann, Christoph | Control of Networks: Routing Strategien |
Se 027 | Kornow, Johannes | Control of Networks: Multiprotocol Label Switching |
Se 028 | Roth, Matthias | Control of Networks: Warteschlangenmanagement |
Se 029 | Gabriel, T. | Stabilität in NCS unter Berücksichtigung von Paketverlusten und Delays - zwei zeitkont. LMI Ansätze |
Se 030 | Holzapfel, Erik | Stabilisierung von NCSs (Networked Cotnrol Systems) mit beliebigen, aber endlichen Paketverlusten |
Se 031 | Lorenz, Waldemar | Modellierung von Zeiten in PRISM |
Se 032 | Yang, Wenbin | Haus Automatisierung im "Haus der Gegenwart" |
Se 033 | Heinz, Vadim | Assisted Living: Das InHaus in Duisburg |
Se 034 | Bernd Schulze | Funktechnologien in der Automatisierungstechnik |
Se 035 | Markus Stöhr | Funktechnologien in der Automatisierungstechnik |
Se 036 | Sebastian Sartor | Funktechnologien in der Automatisierungstechnik |
Se 037 | Sergej Gofferberg | Funktechnologien in der Automatisierungstechnik |
Se 038 | Tan Li | Überblick über Assisted-Living-Produkte |
Se 039 | Wu Yi | Überblick über Assisted-Living-Produkte |
Se 040 | Tunahan AVCI | Modeling of Networked Automation Systems by Guy Juanole |
Se 041 | Ekhteraei, Shermin | Modeling of Networked Automation Systems: Prof. Down Tilbury |
Se 042 | Romero Segovia, Vanessa | Modeling of Networked Automation Systems: Joost Pieter Katoen |
Se 043 | Ollinger, Lisa | Fehlerdiagnose in ereignisdiskreten Systemen mit zentralem und verteiltem Diagnoser-Ansatz |
Se 044 | Theile, Aicha | Steady-State-Betrachtung von Markov-Modellen zur Verifikation normierter PFD-Formeln |
Se 045 | Fankem, Steve | Berechnung von MTTFd und MTTFs mit Markov-Modellen |
Se 046 | Rodner, Thorsten | Online-Fehlerdiagnose mit Chronicles |
Se 047 | Hu Xiaoshun | Diagnose zeitbewerteter ereignisdiskreter Systeme |
Se 048 | Fischbach, Eric | Erweiterung des klassischen Steuerungsentwurfs mit Methoden der Supervisory Control Theory |
Se 049 | Zheng, Liu | Grundlagen und Anwendung der Supervisory Control Theory |
Se 050 | Weinmann, Christian | Vergleich von Techniken zur Berechnung der mittleren PFD |
Se 051 | Joseph Ezeti Diang | Netzwerkregelungssysteme mit variabler Totzeit – Stabilität durch Eingangs-Ausgangs-Transformation |
Se 052 | Schneider, S. | Modellierung, Analyse und Entwurf vernetzter Regelsysteme mithilfe schaltender Systeme |
Se 053 | XU YANHAO | Stability of Networked Control Systems |
Se 054 | Zhihua, Hu | Modeling Human Behavior from Simple Sensors in the Home |
Se 055 | Bauer, Philipp | An Incremental Adaptive Life Long Learning Approach for Type-2 Fuzzy Embedded Agents in Ambient Intelligence Environments |
Se 056 | Benny Brendel | Joint Optimization of Communication Rates and Linear Systems |
Se 057 | Kai Hoffmann | Wireless Network Design for Distributed Control |
Se 058 | Yannick Kengne Fotsing | Scheduling and Feedback Co-Design of NCS |
Se 059 | Viet Cuong Ngo | Cross-layer adaptive Feedback Scheduling of Wireless Control Systems |
Se 060 | Brice Ipemboussou | WirelessHART: Applying Wireless Technology in Real-Time Industrial Process |
Se 061 | Philipp Amann | Control Performance Optimization in Networked Embedded Systems |
Se 062 | Naser Damer | Joint Optimization of Wireless Communication and Networked Control Systems |
Se 063 | Beverly Bwali | Investigating Network Optimization Approaches in Wireless Sensor Networks |
Se 064 | Tarik Elarfaoui | Anwendung von genetischen Algorithmen zum Entwurf eines LQR Reglers für ein invertiertes Pendel |
Se 065 | Aziz Boumlik | Entwurf eines PID Reglers basierend auf H-Unendlich-Reglerentwurf für Mehrgrößen-Prozesse |
Se 066 | Landry Kiegaing | H-Unendlich-Ansatz für Optimalregler |
Se 067 | Quack, Andreas | Optimierung in der Identifikation von ereignisdiskreten System |
Se 068 | Gleser, Tobias | Systematische Entwicklung einer Steuerung für ereignis-diskrete Systeme mit Minimierungstechniken |
Se 069 | Moussa, Ayman | Reduzierung der Ausfallwahrscheinlichkeit und Verlängerung des Proof-Test-Intervalls durch Einsatz von Partial-Stroke-Tests am Beispiel von Stellgeräten |
Se 070 | Kuhn, Tobias | Berechnung der "Probability of Failure on Demand" (PFD) einer heterogenen 1-aus-2 Struktur in Anlehnung an die EN 61508 |
Se 071 | Zhang, Ning | SIL Rated Protection Relays Meet IEC 61508 Safety Requirements Without Lowering Process Availability |
Se 072 | Thiemann, Sebastian | EN 61508 und Mechanik - zwei Welten treffen sich |
Se 073 | Kennel, Fabian | On-line Reliability Prediction via Dynamic Failure Rate Model |
Se 074 | Chukwulobe, Kelvin | A New Methodology for Risk-based Availability Analysis |
Se 075 | Castro, Matheus | Discriminating among the Log-Normal, Weibull, and Generalized Exponential Distributions |
Se 076 | Christoph Gielen | Entwicklung eines feldprogrammierbaren drahtlosen modularen Sensornetzwerkknoten für ambiente Systeme |
Se 077 | Klaudius Werber | Freiheit, Selbstbestimmtheit und Privatsphäre trotz Ambienter Intelligenz? |
Se 078 | Imran Zahid | A first step towards a pervasive and smart ZigBee sensor System for assistance and rehabilitation |
Se 079 | Florian Tränkle | A Networked Multisensor System for Ambient Assisted Living application |
Se 080 | Patrick Andres | Bi-Fi: An embedded sensor / system architecture for remote biological monitoring |
Se 081 | Florian Wolf | Eingebettete verteilte Lernalgorithmen in drahtlosen ad-hoc Steuerungsnetzwerken |
Se 082 | Condne, Tobias | Verwendung von heterogenen kabellosen Sensor-Netzwerken in einem Fernüberwachungssystem zur Gesundheitspflege |
Se 083 | Bernard Ticala | Verwendung von Micro-Climate Sensorik zur Verbesserung der RF-Lokalisierung in Assisted Living Umgebungen |
Se 084 | Adil Nachit | Fuzzy Control for Networked Control Systems |
Se 085 | Hongyue Wang | Fuzzy Immune Self-Regulating PID Control Based on Modified Smith Predictor for Networked Control Systems |
Se 086 | Marwen Hammami | Generating Fuzzy Rules to Identify Relevant Cases in Case-Based Reasoning |
Se 087 | Omair Rafique | Enhancing Functionality of Complex Plant Hybrid Control System Using Case-Based Reasoning |
Se 088 | Felix Lenhart | Proactive Fuzzy Control and Adaptation Methods for Smart Homes |
Se 089 | Tommaso Tomaiuolo | Employing Computational Intelligence to Generate More Intelligent and Energy Efficient Living Spaces |
Se 090 | Styve Nanmegni | Design Optimization of a Safety-Instrumented System Based on RAMS+C Addressing IEC 61508 Requirements and Diverse Redundancy |
Se 091 | Robert Epp | Modelling and Optimization of Proof Testing Policies for Safety Instrumented Systems |
Se 092 | Ismael M. Al Jawad | Energy Efficient Building Climate Control using Stochastic Model Predictive Control and Weather Predictions |
Se 093 | Tobias Laubscher | Distributed Wireless Control for Building Energy Management |
Se 094 | Angel Canizales | An Energy Efficient and QoS Aware Multipath Routing Protocol for Wireless Sensor Networks |
Se 095 | Robert Gernhardt | A Multi-objective Genetic Algorithm based Approaches for Energy Efficient QoS-Routing in Two-tiered Wireless Sensor Networks |
Se 096 | Ali Al-Yacoub | The Smart Thermostat: Using Occupancy Sensors to Save Energy in Homes |
Se 097 | Andre Wolf | Using Simple Light Sensors to Achieve Smart Daylight Harvesting |
Se 098 | Juvenal Saucedo | Occupancy-Driven Energy Management for Smart Building Automation |
Se 099 | Anna Nehring | Occupancy Based Demand Response HVAC Control Strategy |
Se 100 | Daniel Sigmund | Messungen an einem PROFIsafe unterstützenden WirelessHART Netzwerk |
Se 101 | Thomas Leifeld | Event-predictive Control for Energy Saving of Wireless Networked Control System |
Se 102 | Van, Duc Hai | Design and Implementation of a Routing Protocol for Seamless Integration of Unidirectional Energy-Autarkic Wireless Sensor Nodes |
Se 103 | Huang, Emei | The Smart Thermostat: Using Occupancy Sensors to Save Energy in Homes |
Se 104 | Müller, Sebastian | Co-simulation Based Building Controls Implementation with Networked Sensors and Actuators |
Se 105 | Lei, Xu | Building Control and Storage Management with Dynamic Tariffs for Shaping Demand Response |
Se 106 | Al- Jaafreh, Abdel-Karim | Managing Plug-Loads for Demand Response within Buildings |
Se 107 | Tadayon, Negin | The Hitchhiker’s Guide to Successful Residential Sensing Deployments |
Se 108 | Chen, Bicheng | Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort |
Se 109 | Guan, Jingpeng | Duty-Cycling Buildings Aggressively: The Next Frontier in HVAC Control |
Se 110 | Ma, Yongling | Co-simulation of building energy and control systems with the Building Controls Virtual Test Bed |
Se 111 | Lin, Xiaohai | Simulation-Assisted Building Energy Performance Improvement Using Sensible Control Decisions |
Se 112 | Wei, Lili | Keeping the Resident in the Loop: Adapting the Smart Home to the User |
Se 113 | Jean Marc Djomo Kwonang | Scalable scheduling algorithms for wireless networked control systems |
Se 114 | Diana Kutzner | Multi-objective reliability optimization of series-parallel systems with a choice of redundancy strategies |
Se 115 | Brice Kamdem Foudji | Effective computing algorithm for maintenance optimization of highly reliable systems |
Se 116 | Serges Rodrigue Kamgue Foko | Decentralized Fault Free Model Approach for Fault Detection and Isolation of Discrete Event Systems |
Se 117 | Anis Kouada | Evolutionary ensembles model for activity recognition in Smart Homes |
Se 118 | Nizar Ben Nasr | Parameter Tuning in Distributed Home Automation Systems: Towards a Tabu Search Approach |
Se 119 | Janik Schlemminger | Particle Swarm Optimization for Load Balancing in Green Smart Homes |
Se 120 | Gao Miaomiao | Identification of evolutionary sequential systems – part 2: genetic simulation experiments |
Se 121 | Gongda Liu | Optimal Control of Networked Systems with Limited Communication: a Combined Heuristic Search and Convex Optimization Approach |
Se 122 | Rodrigue Nyamuziga | Effective computing algorithm for maintenance optimization of highly reliable systems |
Se 123 | Charles Hakizimana | Integrating production, inventory and maintenance planning for a parallel system with dependent components |
Se 124 | Emanuel Kripp | Genetic Process Mining: A Basic Approach and Its Challenges |
Se 126 | Jing, Wei | Model-based On-board Monitoring for Lithium-Ion Batteries |
Se 127 | Shao, Chunyi | An Identification Method for PLC-based Automated Discrete Event Systems |
Se 128 | Zh. Zhang | A State-Feedback Approach to Event-Based Control |
Se 129 | Salzmann, Paul | Optimal Prooftests for Safety Instrumented Systems Based on Maintenance Models |
Se 130 | Lin, Liangyou | Determination of Timed Transitions in Identified Discrete-Event Models for Fault Detection |
Se 131 | Rayapudi, Ratna Sagar | False Data Injection Attacks in Control Systems |